Here you can see the PIN settings on the Tristar 45A and 60A Charge controllers when used in Diversion modes.
- For a 12V system, the point at which excess power is sent to the dump load is set at 14.6V.
- For a 24V system, it's 29.2V.
- For a 48V system, it's 58.4V.
Below is a video which shows how to configure the Tristar.
Here we show how you configure the Tristar 45A Charge Controller for "diversion" mode so any excess power generated by the turbine can be bleed to the dump load resistor – watch it now!