Victron BlueSolar 30A MPPT Charge Controller 100/30 (12/24V-30A)
The Victron BlueSolar 100/30-MPPT charge controller is able to charge a lower nominal-voltage battery from a higher nominal voltage PV array. You can connect up to 440W of solar panels at 12V and 880W at 24V. The controller will automatically adjust to a 12 or 24V nominal battery voltage.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the powervoltage curve. Conventional MPPT's tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltages for temperature.
|Battery voltage||12/24 V Auto Select|
|Maximum battery current||30A|
|Maximum PV power, 12V||440 W (MPPT range 15 V to 100 V)|
|Maximum PV power, 24V||880 W (MPPT range 30 V to 100 V)|
|Automatic load disconnect||no|
|Maximum PV open circuit voltage||100V|
|Charge voltage 'absorption'||14.4V / 28.8V|
|Charge voltage 'float'||13.8V / 27.6V|
|Charge algorithm||multi-stage adaptive|
|Temperature compensation||-16 mV / °C resp. -32 mV / °C|
|Continuous/peak load current||15A / 50A|
|Low voltage load disconnect||11,1 V / 22,2 V or 11,8 V / 23,6 V or BatteryLife algorithm|
|Low voltage load reconnect||13,1 V / 26,2 V or 14 V / 28 V or BatteryLife algorithm|
|Protection||Battery reverse polarity (fuse)|
|Output short circuit|
|Operating temperature||-30 to +60°C (full rated output up to 40°C)|
|Humidity||100 %, non-condensing|
|Colour||Blue (RAL 5012)|
|Power terminals||13 mm˛ / AWG6|
|Protection category||IP65 (electronic components)|
|Weight 0,5 kg||1250g|
|Dimensions (h x w x d)||130 x 186 x 70 mm|
*All technical specifications and images are correct at the time of publication, but are subject to change without notice.