The Victron EasySolar 5000VA is an all-in-one solar power solution, combining a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure with remote monitoring capability. The product is easy to install, with a minimum of wiring. 

MPPT solar charge control:
Based on Victron's BlueSolar MPPT 150/100 solar charge controller, the EasySolar allows you to connect up to 5800W of solar panels. Using Victron's latest, ultra-fast, MPPT algorithms and their unique Battery Life Protection, you will produce up to 10% more charging power than other MPPT controllers. 

Pure sine wave inverter:
The MPPT charge controller and the inverter/charger share the DC battery connection, so you need only one cable set. When the battery bank is charged, the EasySolar works on DC and provides up to 4000W of 230V continuously. Some electrical items, such as motors, have a power surge when they first start; the EasySolar is designed to cope with short-term peaks of up to 10,000W. When EasySolar detects a 230V input (from shore-power or a generator), it automatically switches away from the DC batteries and uses the AC. This changeover happens in about 12-milliseconds, meaning that even sensitive computer equipment should continue running seamlessly. When using AC, the EasySolar feeds up to 16A directly into your electrical system and uses any surplus power to boost charge the batteries.

Battery charger:
EasySolar has an integrated 70A charger for the main battery bank.

230V AC distribution:
If you are fitting 230V for the first time, you would normally need to fit a consumer unit (fuse box) and RCB's. However, EasySolar makes this even easier than ever, by integrating all of the necessary RCB's. There are four separate AC outputs, all with their own RCB. One of these is only active when shore power or a generator is connected - the other three are permanently active.

Color Control panel
Two outstanding functions:

AC distribution
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers. An additional 16A output is controlled by the AC input: it will switch on only when AC is available.

Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

Unique solar application software
Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. Please see

Your item has been added to your basket

Victron EasySolar Inverter/ Charger/Controller 48/5000/150-100


£2506.24 ex. VAT

Technical Specification

EasySolar Model:
Transfer switch
Input voltage range
“Heavy duty” output AC
Output voltage
230V AC ± 2%
50Hz ± 0,1%
Cont. output power at 25 °C
5000VA / 4000W
Cont. output power at 40 °C
Peak power
Maximum efficiency
Zero-load power
Zero load power in search mode
Input voltage range
187-265 VAC
Input frequency
45 – 65 Hz
Charge voltage 'absorption'
Charge voltage 'float'
Storage mode
Charge current
Maximum output current
Maximum PV power
Maximum PV open circuit voltage
Maximum efficiency
Charge voltage 'absorption', default
Charge voltage 'float', default
Charge algorithm
multi-stage adaptive
Operating temp. range
-40 to +65°C (fan assisted cooling)
Humidity (non condensing)
max 95%
Protection category
Four M8 bolts
Solar PV connection
2 sets of MC4
Screw terminals 13mm2
Dimensions (h x w x d)
877 x 328 x 241 mm
Safety EN 60335-1, EN 60335-2-29, EN 62109-1
Emission / Immunity EN55014-1, EN 55014-2, EN 61000-3-3
*All technical specifications and images are correct at the time of publication, but are subject to change without notice.
Your item has been added to your basket

Victron EasySolar Inverter/ Charger/Controller 48/5000/150-100


£2506.24 ex. VAT

Tell us about your project

Our Off-grid experts will come back with recommendations

Please leave your details and our experienced team will be in touch soon to assist you.
Please complete all required fields.
Can we help?
Leading Edge
Off-Grid Power Requirements
Please complete this form with your specific requirements and we would be happy to put together a bespoke off-grid power system. We will recommend a solution using our own British made wind turbines, best-in-class solar panels and deep-cycle batteries.

Contact Information

Once we have assessed your requirements, our experts will call you to discuss the equipment you'll need to achieve your goals.

What Is The Application?

Please tell us as much as you can about your use case. We understand that you may not be able to answer all questions. We will call you to discuss your requirements in any case.

Device Name
Power Draw (W)
Peak Power Draw on Startup (W)
Standby Power (W)
Hours Active Per Day (W)
Days Per Week In Use (W)

Voltage Preference

Do you have a preference for the system voltage?

Outputs Required

Do you have a preference for the systems output?

Site Location

Please tell us a little bit about the site location

Other Details

No. of days autonomy required

Is there anything else we should know?

Leading Edge
Sign Up To Receive Our Newsletter

Stay up to date with Leading Edge innovations and offers by joining our mailing list. Occassionally we send informative newsletters, offers and promotions that we think you'll find useful or interesting.

Your Details

Please provide your contact details so that you can receive our newsletter. We will send this occassionally with information about our latest innovations and offers.