Victron Blue Solar 15A MPPT Charge Controller (12/24V)
Victron's 15A BlueSolar MPPT charge controller is designed to maximise power output from small solar systems up to 400W (200W at 12V). The MPPT calculations and functionality of the BlueSolar 75/15 and 100/15 are significantly faster, producing up to 10% more than other MPPT controllers in changing weather conditions, such as a clouded sky. The two versions differ by the maximum input voltage from the solar panels; either 75V or 100V.
In addition to protecting the batteries from deep-discharge, by disconnecting any attached electrical devices, Victron have also integrated their 'Battery-Life' algorithm. Sometimes, due to heavy use or very poor weather, the solar panels may not provide enough power to fully recharge the batteries within a 24-hour period. In this case, if activated, the BlueSolar 75/15 and 100/15 will use stored information to slightly increase the battery disconnect voltage. This will continue until the batteries have reached 100% state of charge again. Thereafter, the battery disconnect voltage will be cycled so that a full recharge of the batteries is achieved about once a week.
Since many solar systems are outdoors, Victron have fully encapsulated the BlueSolar 75/15 and 100/15 electronics. This means that the charge controller is IP65 rated, so it can be used outside without any other protection from the weather.
|Battery voltage||12/24 V Auto Select|
|Maximum battery current||15A|
|Maximum PV power, 12V||200 W (MPPT range 15 V to 70 V)|
|Maximum PV power, 24V||400 W (MPPT range 30 V to 70 V)|
|Automatic load disconnect Yes, maximum load||15A|
|Maximum PV open circuit voltage||75V (75/15), 100V (100/15)|
|Charge voltage 'absorption'||14.4V / 28.8V|
|Charge voltage 'float'||13.8V / 27.6V|
|Charge algorithm||multi-stage adaptive|
|Temperature compensation||-16 mV / °C resp. -32 mV / °C|
|Continuous/peak load current||15A / 50A|
|Low voltage load disconnect||11,1 V / 22,2 V or 11,8 V / 23,6 V or BatteryLife algorithm|
|Low voltage load reconnect||13,1 V / 26,2 V or 14 V / 28 V or BatteryLife algorithm|
|Protection||Battery reverse polarity (fuse)|
|Output short circuit|
|Operating temperature||-30 to +60°C (full rated output up to 40°C)|
|Humidity||100 %, non-condensing|
|Colour||Blue (RAL 5012)|
|Power terminals||6 mm˛ / AWG10|
|Protection category||IP65 (electronic components)|
|Weight 0,5 kg||500g|
|Dimensions (h x w x d)||100 x 105 x 40 mm|
*All technical specifications and images are correct at the time of publication, but are subject to change without notice.